Maintenance of a Laser Cutting Machine

Proper maintenance of laser cutting machine is essential and has many benefits like:

• It enhances the longevity of your laser machine
• It ensures that the laser can perform at an optimum level
• It saves your money with less need for replacements

Maintenance is important to keep the laser machine clean of fumes, debris, smoke, and other dirt. Because that accumulation will cause system failures someday, and maintenance is the key to preventing it. But investing in good quality laser parts like amada laser parts is equally important to prevent damage. So, in this article, we will have a look at some tips you can follow to maintain your laser machine regularly.

How to Maintain Your Laser Machine

General Maintenance

You need to carry out general maintenance tasks on your laser machine regularly. Dust with the debris is inevitably going to form in every laser machine. But you can minimize its effect on the machine's efficiency and final output by cleaning up your machine's cabinet, bed, and everywhere. This intense cleaning can only prevent the effect of debris on the final product. You need to ensure that you let the machine cool down completely before starting any cleaning process. You should also ensure that you have invested in all the necessary spare parts for each laser part. Here, choosing quality spare parts like amada spare parts is important to boost the performance of the machine.

Laser Cutter Cleaning

Some hard materials such as woods, acrylic, and MDF release more residue and flammable oils. This dirt can affect the machine's components and can potentially initiate fire if not taken care of. Cleaning the cutter is as important as the cleaning the whole machine. This dirt gets accumulated most on the cutter and the surface where the cutting is done.

So, ensure that you do regular cleaning of the laser cutter with suitable solutions to prevent the dirt from getting on the products and enhance the laser machine's efficiency. For laser cutter cleaning, you need some supplies like a suitable liquid solution, soft brushes, paint scraper, pipe cleaners, stiff bristle brushes, and napkins.

Air-assist Compressor

You need to check if the air-assist compressor is working correctly. For this, you need to check for any obstruction in elements of filtration that might be present in the delivery hose from the compressor. You need to ensure that there is no obstruction from the starting point to the nozzle. Reduced airflow towards the nozzle often increases the risk of the flame breaking out on materials of the laser cutting machine. So, you must check the airflow of the entire machine.

Maintaining Optics

Dirty optics has the potential to reduce the laser beam's strength. You can visually check if the optics need cleaning or not. You need to check the optics regularly, otherwise, you will notice poor results such as untidy cutting, blurry lines, etc. It is important to clean the optics because dirt can combust or burn into the optic's surface. This will permanently damage the optics. Cleaning them after every 10 hours is ideal, but it also depends on what type of material you are using. You can take an IPA solution or acetone solution on gentle cotton buds for cleaning the optics by yourself.

Winter Maintenance

Did you know that the drop-in temperature during the winter months in your area can change the results of your laser machine? In extra-cold weather or surrounding, your machine will require extra attention and proper regulations. You can ensure that the room where the laser machine is kept is between 0°C-5°C. You can even use a good antifreeze to maintain the temperature of your machine. Here, you will need to avoid using any colored automotive colane as it can rust the coils and damage the seals of your machine's chiller. Here, using quality parts like amada laser parts can prevent damage from weather.

Maintaining Chiller

The heat produced by laser machines needs regulation. You can choose water chillers as they are an effective method of keeping the temperature down. This will ensure that the tube does not overheat. It is important to keep a close eye on the chiller's temperature. You need to locate the filters in the chiller after every few weeks. You also need to check if the water has started contaminating, and if it has, then you need to change it. You can use distilled or deionized water. Avoid using regular water as it can encourage bacterial growth that can clog the piping area.

Sodium hypochlorite (also known as bleach) is corrosive to some metals like copper and stainless steel. Thus, this solution needs to be avoided while maintaining any laser machine accessories. There is a chloride ion present in the bleach, which is an oxidizing agent. It attacks the passive layer on the metal, which causes localized damage. Even the trace amounts of bleach can form rust as stainless steel gets corroded gradually. This disrupts the efficiency of the machine.

Conclusion

I would like to conclude this article by offering you a checklist to maintain your laser machine. This information may vary according to the material you use.

For weekly maintenance, you can:

• Check water level
• Clean lens with Acetone/Alcohol
• Oil runners with light oil
• Clean optics
• Remove debris from the machine base
• Clean machine bed

For monthly maintenance, you can:

• Clean mirrors
• Oil rise and fall of laser bed
• Clean impeller on the fan unit
• Change the water if contaminated
• Clean filter in chiller

You can get your machine to a service store for full machine/s service annually. Also, you must keep quality amada spare parts for each laser parts in case of any last minute requirements. Good quality parts ensure to give your output the same finishing as that of the original.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/maintenance-of-a-laser-cutting-machine

How to Manage Spare Parts Efficiently

It is important to manage spare parts efficiently as it acts as a foundation for dependable plant operations. It will make the crises less destructive and more manageable. As a plant manager, you need to know the tips to manage them. So, in the article, we will discuss some of the factors that you must consider to manage your spare parts and make the company more effective. Let us start with a pro tip: Always use quality spare parts like Trumpf parts to get the best quality out of them.

Tips to Manage Spare Parts Efficiently

The below tips will help you to enhance performance, increase productivity, and reduce the cost of the plant.

Strategize the Operation

Many businesses adopt the practice of creating an operational plan based on responsive events. One can strategize the business with either a reactive or predictive approach. In order to perform spare parts management, you will need a predictive approach to strategize your business efficiently. I don't mean that you need to completely abandon a reactive approach here, but the core approach needs to be a preventive one. This includes the ability to prevent any future problems before they occur.

You should always look out for failure patterns because they often reveal problems that are less visible or we forget to notice. The collection and analysis of data need to be relevant in order to improve your business management strategy. You need to use predictive management to use the resources efficiently, reduce costs, and save time.

Effective Parts Inventory Control

You need to store and organize spare parts in a chosen and secure space. This will help you to keep a check on spare inventories, save time in finding the needed part, and also save the parts from being damaged. Proper analysis and review of the storage and check-out system is necessary as it can reveal a lot about the quality control of your inventory. 

For better inventory quality management, you can develop precise standards to categorize and define spares. You can periodically review all the spare parts based on time, replacements, etc. You can also conduct a regular review of the spare parts to check if you are holding any excess stock for particular parts or if you are running out of any.

Adopt Better Security Measures

Limiting access to the inventory parts warehouse is a step you should consider applying. Giving everyone access to the inventory parts warehouse will only cause never-ending entries of inventory inaccuracies. You can adopt policies that can restrict some staff from accessing the inventory. You should also install security camera systems in your inventory warehouse. You can also keep security guards that allow only people who have a certain badge to walk into inventory.  

Stock Parts for New Equipment

The most common mistake every other plant manager does is storing no spare parts for new equipment. It often seems that there is no need to invest in spare parts for new equipment, but there is. Because you should not just assume that the vendor you bought the equipment from sells faultless equipment. 

It may be suitable for some time, but there will be a time when it will need repairing, and you never know how early the problems can arise. In such situations, investing in spare parts for new equipment is a smart thing to do. And while socking the spare parts for the new equipment, ensure that you choose the best quality parts like Trumpf spare parts for gaining its original-like performance.

Calculating Risk for Every Equipment

Any equipment can cause failure at any time and you cannot control it most of the time. Instead, you can calculate the overall downtime risk and possible aids for every spare part. This way you can have a possible time when the spare part may need a replacement or polish. Additionally, you can use good quality spare parts like Trumpf spare parts to increase the lifespan of spare parts. 

Here the question is, how can you calculate risk for each equipment? Let me help you with some activities you can perform daily for this. You can calculate the exposure of a spare part by determining the total cost of one-hour downtime it gets for your firm. You also need to determine the cost and reasons for any part's damage for further precautions. You can create different sections of cost for purchasing such as "new vs. old" parts for replacement.

Final Words

With the above tips, you can make your inventory system efficient and responsive to meet your operational demands. With proper spare part management, you can save time, money and accelerate the overall performance of your equipment. But the first and foremost thing you need to start with is investing in good quality spare parts like Amada and Trumpf parts.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/how-to-manage-spare-parts-efficiently

What is Plasma Cutting and What are Plasma Cutter Consumables?

Plasma cutters have the capability to cut the metals in simple and complex shapes like holes, edges, markings, etc. Plasma cutters are cost-effective and practical compared to oxy-fuel, laser, and water jet cutting processes. Let us understand how plasma cutters work and what consumables you will need.

What is Plasma Cutter?

Plasma cutting is a cutting technique that uses an accelerated jet of hot plasma to cut through conductive metals like steel, aluminum, brass, titanium, copper, etc. It is widely used in manufacturing, automotive repair, industrial construction, restoring, scrapping, etc. Plasma cutting can be done using a handheld plasma torch also known as plasma arcs, guns, or cutters. For that, you will need hand held plasma cutter parts.

Due to high speed, precise cuts, and low cost, plasma cutting is widely used by small companies and industries using CNC. 

Why You Need Plasma Cutter Consumables?

Using plasma cutter over time, components start wearing off gradually. Worn consumables can ruin metal while cutting. Your operator can tell which consumables are worn by sound, color, etc. 

The best way to keep a check on the condition of your consumables is to periodically inspect consumables. If you see that the quality of the cut is deteriorating, you have an indication that it needs to be changed. 

It is a good practice to maintain a record of the average life of parts over time and prepare a guideline for consumables based on the thickness of the material, amperage, and material. So operator will know after what time he needs to check the components thoroughly to prevent catastrophic failure.

It is essential that you run all your parts at the correct amperage. High or low amperage can impact the cut quality. However, using incorrect consumables can also lead to shortened life and cut quality. 

List of Consumables With Their Purpose

You can choose from different consumables like Hypertherm powermax 45 consumables, Powermax 45 XP, Powermax 65, etc. Here is the list of the consumables you might need.

Electrode

The electrode provides power to the plasma arc. Electrode conducts high voltage or high-frequency energy while you start the cut. This adds energy to ionize the cuttings gas that creates plasma and allows the arc to start.

Swirl Ring

A swirl ring is made of ceramic or volcanic ash. It controls and swirls the plasma gas around the electrodes and inside nozzles. It basically controls the point where the arc is attached to the emitter and also the plasma flow through the nozzle that affects the edge angularity. It usually swirls in clockwise rotation but their counterclockwise swirls are to assist for mirror cutting.

Nozzle

Nozzle constricts the gas stream flowing through the orifice in the center of the nozzle. A nozzle that is worn out or improper will cause the part to have an improper size or edge. The orifice must be a circle and not oval or egg-shaped. 

Inner Retaining Cap

The purpose of the retaining cap is to hold all the internal stack components in proper alignment. A damaged or improper retainer will cause the rest of the consumables to fit improperly and it can cause a gas error, coolant leaks, or poor cut quality.

Shield Cap

As the name suggests, a shield protects all the consumables from sparks and molten metals. There are mostly made of copper and provide a proper distance between nozzle and workpiece.

Water Tube

It works as a coolant to the tips of the electrodes to prevent overheating. The size of the tube is important otherwise it will cause premature electrode failure due to overheating.

Conclusion

It is important to invest in a good-quality hand held plasma cutter parts. Because poor quality will have less shelf-life. You can find different Hypertherm consumables like Hypertherm powermax 45 consumables, powermax 45XP, powermax 65, etc. easily from certified suppliers.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/what-is-plasma-cutting-and-what-are-plasma-cutter-consumables

12 Primary Parts of a Laser Cutter

Laser cutting is basically a technology that uses a laser cutter to vaporize materials and results in precise cutting. It can be used on many things including copper, plastic, composites, textiles, steel, etc. The main components in a laser cutting machine are laser cutters. And in this article, we are going to talk about different components of laser cutters. Let us get started then.

 

The laser cutter primarily consists of the main cutting machine and electricity. The whole laser cutting system is composed of the CNC controller (electrical control), mechanical part, and laser generator + reflector path. The auxiliary equipment list of the laser cutter is:

 

• Filter
• Stabilizer power supply
• Water chiller
• Air cleaner
• Gas cylinder
• Air compressor
• Cooling dryer
• Gas storage tank
• Slag discharging machine

 

Now let us dig deep into each component of the laser cutter. But you need to remember that below are only the main system parts; there are also minor vital parts that need your attention. Also, having spare parts is necessary for any emergency. So, you can invest in Hypertherm hpr260xd parts and Hypertherm hpr130xd spare parts for enhancing the performance of your laser cutter.

 

1. Laser cutter frame

 

It is the mechanical part to record the movement in the X, Y, Z-axis, on the platform where laser cutting is performed. Laser cutter frames vary as per the purpose of the machine. When it comes to fiber laser cutting machines, they have extremely high requirements for machine tool stability. So, the frames are manufactured accordingly.

 

It is important to have high precision with high stability machine tools to improve laser cutting output quality. The mainstream machine tools here are cantilever type, gantry type, and beam type.

 

Also, different machine tools have different functions like beam-type machine tools used for material cutting by large company's manufacturers. There are different models for specific fields like 3D fiber laser cutting used in the automotive industry.

 

2. Laser Generator

 

It is a device that produces a laser light source. These generators are the most potent and expensive source of laser equipment like an engine in the car. These generators are useful to supply electricity and power to the laser cutting machine.

 

3. Lenses

 

Laser lenses are the most useful parts of the entire fiber laser cutter. Many optical devices have laser lenses. Different lenses have various functions like semi-reverse lenses, full-reflex lenses, and focusing lenses. Ensure that you are using good quality lenses as the quality of them will directly affect the output power of the laser. And this will affect the overall performance of the machine. These lenses are available in two types:

 

• Domestic
• Imported

 

The difference is in both price and quality, so if you are investing for the long run, then you must go for imported lenses. 

 

4. Laser Generator

 

A laser generator is useful for converting electrical energy into light energy. For instance, it converts CO2 lasers with a conversion rate of 20%. Here, the remaining energy gets converted into heat.

 

5. Water Chiller

 

The chilling or cooling water keeps the excess heat away. This is important to make the laser generator function properly. It also cools down the focusing mirror and external optical path reflector. This way, you can keep the quality of stable beam transmission neat and prevent the lends from turning too hot. Eventually, with a water chiller, you can prevent cracks and generator damage.

 

6. CNC System

 

The control system is one of the leading operating systems of the fiber laser cutting machine. It controls the machine tool to record the movement of the X, Y, and Z axes. It even controls the output power of the laser.

 

Again, choosing a good quality system is important here; it would affect the stability of the fiber laser cutting machine. One needs to control the software of the system accurately to get the precise results.

 

7. Gas Cylinders

 

The laser cutter includes industrial gas cylinders like auxiliary gas cylinders and medium gas cylinders. These cylinders are usually useful for supplementing laser oscillations and supplying cutting head use.  

 

8. Motor

 

The motor system of the laser cutting machine is a core component of the entire system.

Its performance will directly affect the processing effect of the laser and the production efficiency of the product.

 

9. Stepper Motor

 

This motor has a sensitive response and a fast-starting speed. It is perfectly suitable for cutting and engraving processes. Its quality will directly affect the final output. The price of this motor is usually less even if you go for the excellent quality ones.

 

10. Servo Motor

 

This motor provides you with fast-moving speed, stable performance, smooth movement, smooth edge processing, high load, and fast cutting speed. It is usually high in price but is suitable for almost all industries and purposes. 

 

11. Slag Discharge Machine

 

You need this machine to eliminate the leftover or waste materials during the laser cutting method. It will automatically collect all the waste generated during the process. 

 

12. Dust Extractor

 

This is useful for filtering smoke and dust produced during the fabrication process. This extractor processes the smoke and dust to give environmentally protective surroundings around the machine.

 

Besides the above-mentioned parts, you also need to invest in quality minor essential parts and even spare parts. Hypertherm hpr130xd spare parts and Hypertherm hpr260xd parts are what I am talking about. These parts will ensure the smooth running of your laser machine.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/12-primary-parts-of-a-laser-cutter

What You Need to Know About Press Brakes?

Press brakes are one of the most vital pieces of any equipment. Press brakes are fabrication tools used to bend a sheet or plate of metal. These brakes help fabricators to create formed parts like enclosures, brackets, channels, ductwork, structural forms, etc. These brakes are versatile and have various applications in various industries, which we will see in this article.

The only thing you need to ensure is investing in good quality machine parts like Amada parts, so that you can get accurate results. Now, you need to know much more about press breaks to choose the ideal ones, right? So, let us start with knowing its types, uses, and benefits.

Types of Press Brakes

There are different types of press brakes classified depending on the generation of their bending force. The four types of press brakes include:

• Electric Brakes
• Hydraulic Brakes
• Pneumatic Brakes
• Mechanical Brakes

Uses

Aerospace

Did you know that no plane could be built without a press brake? Because without a press brake, workers can never angle the aerospace metal as needed. Press brakes allow operators to bend a metal sheet into almost any desired shape. Thus, aerospace professionals use a press brake to bend and mold the sheet metal, which is used as a protective layering on planes.

Automotive

The automotive industry uses an assembly system to make the process of making cars efficient. The assembly lines can help to make more vehicles a day because it includes the high-quality latest technology. For instance, the workers use press brakes to construct automobiles because they can bend sheet metal to fit as desired. This way, the press brakes help increase the productivity of the automobile manufacturers.

Construction

While construction workers commonly use drywall to fill out a building’s interior and sheet metal for the roofs. These metal roofs are durable to withstand the elements. But they are equally tough to deal with when it comes to cueing them or shaping them according to the fittings. So, it is easy for people to break the metals in one place and then transport it to different places.

Many industries use press brakes to increase their productivity and perform complex tasks easily. Thus, it is advisable that every company that deals with metal manufacturing or metal cutting on a daily basis must invest in a press brake.

Benefits of Press Brakes

Reduced Material Wastage

Machines usually use a good amount of material to curve the desired items. But press brakes cut down the material waste by boosting high-end precision and accuracy while giving the desired shape to the materials.

Punching

If you use an application to punch a systematic row of holes in a part, then a press brake can be fitted easily with individual punch sets or even with a complete die set. This leads to punching holes accurately in one stroke.

Automation

Modern Press brakes can be easily automated to improve accuracy, increase productivity, and reduce overall labor costs. Press brakes have specialized data ports and many innovative accessories to facilitate the process of automation in the metal manufacturing industry. Adding material handling robotics, sheet followers for assisting the operator in lifting heavier parts can help to increase productivity. It also provides the same result with each and every bend. If you are looking to buy a good press brake, you can search for ‘Amada press brake for sale’ online to find some good options that match with your requirements.

Hemming

As you know, hemming is one of the necessary operations in most fabricating methods. It is a process of folding a small portion of the sheet over and closing it back on itself. This creates a rigid, thick, and durable edge with round edges for safe material handling. It is useful for manufacturing all types of boxes, panels, and covers. One can complete the operation with a custom toolset of press brakes or by way of a simple flat hemming die. The goal here is to improve the quality of the output with less wastage, and press brakes can help there.

Complex Forming

Press brakes offer unmatched flexibility. It gets combined with segmented punch sets, acute tooling, and die sets. With this, a press brake can easily form complicated multi-angle parts easily.

Production Bending

Using a CNC control is the ideal way on a press brake for repeating the actions over and over again. Here, the operator can use the product forming process to boost the accuracy with a press brake regardless of the flanges being similar or varying in length and angle.

Conclusion

As you saw, press brakes have many applications that help operators and fabricators to bend sheet metals for creating items of different shapes and forms easily. With press brakes, you can enhance the accuracy of the output and reduce wastage. You can find it in mostly every machine shop or fabrication job shop. Investing in good machine parts and press brakes are important.

So, choose high quality parts like Amada parts to get the best result of press brakes. When we talk about high-quality, it does not always have to be expensive. For example, you can just search ‘Amada press brake for sale’ and you will get all the affordable options.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/what-you-need-to-know-about-press-brakes

5 Advantages of Using Laser Cutting Method

If you belong to the manufacturing industry, you probably might have thought about using a laser cutting method for your next project. But the doubt clouding on your head would be, 'how to trust any other process than the traditional one?' To answer that, I have mentioned some of the advantages of using laser cutting methods. This will help you know how this method saves your time, money, decreases your labor work, and gives versatility, productivity, and precise cutting. The accuracy of the laser cutting method also depends on the parts you use for it. So, always opt for quality laser parts like Mazak laser parts. This will improve your output's precision and the shelf life of the machine.

 

1. Provides High Accuracy and Precise Cutting

 

The laser cutting machine includes a small, powerful laser that provides a focused light beam on the material. This way, the machine can cut the material precisely. This laser usually possesses a tolerance of 0.003 mm to 0.006 mm. And a plasma cutter possesses a typical tolerance of about 0.02 mm. Some die-cutting tools may have tolerance power as high as 1-3 millimeters or even more. The powerful laser melts material with impeccable accuracy.

 

2. Versatile at Cutting

 

You can use laser cutting for various tasks like cutting complex shapes and on different types of materials including metals like copper, stainless steel, brass, wood, aluminum, plastic, and on various types of textiles. Laser cutters are also useful for engraving, drilling, and marking. The versatility of laser cutting machines makes it an essential part of modern machining.

 

3. Handles Complex Cuttings

 

You can use a laser cutting method to work on highly narrow sections of any material. For example, if you want various complex geometries on a material, then laser cutting will provide precise outputs rather than traditional methods. The result of cutting with this method is nothing but precision. It causes zero distortion or warping to the cut area.

 

4. Benefits Economically

 

One of the significant benefits of a laser cutting method is that it is economical to use. Traditional cutting methods require dyes, punches, and other things custom-made, particularly for individual orders, but that is not the case with laser cutting. 

 

Whether you use this technique for daily project works or limited-run projects, this technology will prove to be economically friendly in any scale of work. How? Laser cutters do not use any specific type of tooling. For example, you do not have to custom-prepare individual dyes for different shapes or projects.  

You just need to have a material, a laser cutter, and a schematic design to load into the computer. This way, you can save costs for small-batch projects.

 

Plus, laser machine tools have fewer mechanical moving parts. Thus, you do not have to pay high maintenance costs or harbor much effort in operating it. For that, it’s essential that you use quality parts like Mazak laser parts or mazak replacement parts to benefit from all the advantages of laser cutting machines.

 

5. Less Sheet Waste

 

The laser cutting method uses the highest amount of your sheet material. The laser cutter maximizes the number of usable parts and components from the sheet material by a process called nesting. This results in less wastage of materials and more output from a single sheet. Additionally, it saves time by exchanging new sheets more quickly than the traditional method. 

Wrapping it Up

I hope this article helped you to know how laser cutting can be advantageous for your business and why the majority of businesses have already started using it. It provides unparalleled precision accuracy, saves cost, and reduces raw material wastage. You can avail all these benefits only if you invest in quality parts like Mazak laser parts. You can get these parts online and in near by market too.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/5-advantages-of-using-laser-cutting-method 

Top 5 Tips for Maintaining Laser Cutting Machines

The productivity and the longevity of any equipment depend on the maintenance and the way of its usage. The same is with laser cutting machines. Equipment maintenance must be done by the operators who regularly use the machine and who are trained to do so, keeping in mind the fragility of certain parts.

 

In case, any part or component needs replacement, it must be replaced immediately. If you have an amada laser cutting machine, then you can easily find amada machine replacement parts online. Below are some general maintenance tips that you can follow to extend the life of your laser machine and prevent production breakdowns. 

Daily Inspection and Cleaning

The simple thing to prolong the life of a laser cutting machine is to clean it regularly. The operators must clean the machine after every job. You should empty slag drawers and bins before starting a new cut. Operators can use lint-free cloths or microfiber towels to clean the parts of the machine. The area around the laser machine should also be kept clean.

 

Ceramic ring and nozzle must be replaced daily to have a precise and sharp cut. If the nozzle is damaged by the laser beam then it must be replaced promptly. You should always consider using parts that are of good quality. Amada machine replacement parts are of premium quality so that your machine works at its best. 

Cleaning Optics

Different methods are used for cleaning different types of lenses. For mirrors with flat surfaces use lens paper and for mirrors with curved surfaces use a cotton swab to clean. Firstly, use a blower to blow the dust on the surface of the lens. Then depending on the type of lens take lens paper or cotton swab, moist it with high purity alcohol or acetone, and rub gently on the lens. Repeat this process several times until the lens is fully cleaned. 

Assist Gas Checks

Laser cutting machines use gas to operate. This gas assists the laser in vaporizing through a material. If the gas is contaminated it can greatly impact the quality of the cut. So for smooth cuts, it is important to have clean gas. Also, check filters to make sure they are doing their job correctly. Leakage in the gas bottles may compromise the safety of operators and the surroundings. So to avoid accidents change the gas bottle as soon as the operators notice any leakage.  

Temperature Maintenance

Laser cutting machines vaporize metal using heat to cut materials. So, keeping the equipment cool is of utmost importance. Operators must check the system's cooler regularly. Coolant levels, filters, and fans need to be cleaned regularly so that they can function properly.

 

If the filters or fans are covered in dust, they won't be able to cool the machine. And it will lead to an increase in the temperature of the machine. Further, it can also damage the machine. So to prevent the machine from getting damaged, operators must check the cooling system regularly. In case of damage in any parts of the machine, it must be replaced with good quality spare parts like amada spare parts.  

Maintenance of Regulated Power Supply

After one month of regulated power supply, cut off the main power supply and tighten all the connections in the terminal and main circuit. Every three months, check the elasticity of the carbon sliding brush. Operators must use dry compressed air to blow the dust gathered on the regulator.  

Conclusion

You must have an effective maintenance policy for planning, controlling, and directing maintenance activities. The maintenance department must have well-trained operators who are well versed with the device. Any replacements required in the machine must be instantly changed for quality production. For spare parts of your amada laser machine, you can google “amada spare parts'' and find it easily online. 

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/top-5-tips-for-maintaining-laser-cutting-machines