Wednesday, September 29, 2021

Plasma Cutting Consumables- Types, Uses, and Tips for Maintenance

 Plasma cutting consumables are different parts of a plasma cutting machine. These consumables include:

  • Torch
  • Electrodes
  • Nozzle
  • Rings
  • Swirls
  • Shields

How long a plasma cutter consumable will last depends on the quality and their extent of usage. If there is any fault in a single plasma cutting component, then the whole system can suffer from malfunctioning.

And you do not want that, right? So, it is better to replace the consumables on a regular time interval. This will optimize the system's performance. Also, Hypertherm powermax 45xp parts serve as an excellent option for installing or replacing. They give you better outcomes and have a longer life.

Plasma consumables are useful for cutting thin and thick metals at a consistent speed. Some consumables may wear out quickly, while some may remain sturdy for a longer period.

Let us put some more light on the different consumables:

Swirl Ring

It is a minor component inside the torch that swirls the gas surrounding the plasma arc. The outer layer of gas helps to focus and direct the arc for providing a greater cutting precision. The swirling process keeps it cool. And the protective layer of gas surrounding the arc contacts the nozzle. The lower temperatures of the nozzle prevent the nozzle from burning up, slowing down the degradation process.

Electrode

It is a narrow piece of copper-containing hafnium. Its job includes:

  • Receiving an electrical current from a cathode block placed inside the torch to which it is connected
  • Focusing the charge through its tip

This causes it to arc onto the workpiece.

Nozzle

It focuses on the plasma arc and the gas surrounding it to provide a clean and precise cut. A nozzle with a larger opening is useful for gouging. And a nozzle with a smaller opening is useful for providing delicate and detailed work.

Retaining Cap

It essentially holds all of the consumable parts of the torch together. The temperatures at this end of the machine are incredibly high, and thus, not only the parts that create and focus the arc worn down but the component holding them together also degrades over time.

Shield Cap

It protects the torch and its other components from sparks and molten metal. It takes the brunt of the fallout. Due to this, the wear to other components minimalizes as much as possible.

Replacing Electrodes and Nozzle

When the electrode produces the arc, the hafnium inside melts, and over time, fragments spurt through the torch in the cutting process. This results in the development of a pit at the end of the electrode. Do not worry; this is perfectly normal, but whenever the pit grows deeper than around 1-1.6 mm, you will need to replace the electrode. This is because there will not be much hafnium left then, and it will soon start burning through the electrode itself. After this, it will become challenging to cut and it can even damage the rest of your torch components. Hypertherm powermax 45xp parts are one of the best choices you can opt for while looking for consumable replacement parts.

It is hard to specify when exactly you will need to replace your nozzle and electrode. This will depend on many factors like:

  • The speed you cut with
  • The thickness of the workpiece
  • The amount of amperage you use

Replacing your consumables with Hypertherm powermax 45 consumables will put you back to optimum cutting performance. Your other components would not need replacement since they are prone to thermal dynamics, slag from the cutting process, and heating and cooling cycles. But do not forget to check your swirl ring and retaining cap for cracks, and if you see any, then you know what to do next, right? Replace them. Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma.

Tips for the Maintenance of the Consumables

  • Abnormal work practices might affect the machine badly, so it is advisable to work moderately
  • Place the materials at an appropriate distance from the plasma cutter
  • Install the system correctly as any disturbance in the network may affect the consumables of the machine adversely
  • Monitor the system regularly to check the condition of a consumable
  • Consider replacing the faulty consumables as soon as possible
  • Keep the system completely dry and free from any moisture as the moisture may cause rust
  • Keep the system free from dust as it might damage the consumable's efficiency

Final Words

Plasma cutter consumables are crucial in the operations of the machine. Also, the quality of the consumables plays an essential role in the machine's output and the life span of consumables. Suitable quality consumables like Hypertherm powermax 45 consumables can give you incredible accuracy and possess a longer life.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/plasma-cutting-consumables-types-uses-and-tips-for-maintenance

Friday, September 24, 2021

Factors to Consider While Buying Any Industrial Equipment

If you are into any manufacturing business, you might be aware of the importance of industrial equipment and its productivity. You need to invest in industrial equipment for better outputs and to provide efficiency to the overall process. It has many more benefits like lowering the manpower requirements, faultless and precise outcomes, providing automation, saving time, etc.

But, purchasing industrial equipment is a significant investment. Thus, you should be careful in investing in any of them. To ensure that you invest in the right one, we have below eight things to keep in mind. This will help you to make the right decision and invest in the right equipment. 

  1. Define Your Needs

While buying any industrial equipment, it is essential to assess all the reasons why your business actually needs it. You need to know if that equipment fulfills your requirements and fits in the purpose you are buying it before making any investments. That is why before shopping for any industrial equipment, it is a good idea to create a list of the tasks for which your equipment is necessary. 

For instance, if you are running a chemical, pharmaceutical, food, and plastics manufacturing business, then equipment pieces like industrial blenders and mixers are useful for mixing various materials. Thus, if you want to buy the right equipment for your industrial business, ensure that you know and understand your needs first. 


  1. Budget

Deciding your budget is a crucial part of purchasing any machinery. So that you can make decisions based on that, for instance, if you have a tight budget, you can consider purchasing used equipment instead of new ones.


Here, you get a piece of used machinery with some benefits, like being less costly than the same quality new machinery. Additionally, if you buy a used one, you can lessen your capital investment, which is important if you are still starting a business.


But, if you have a reasonable budget, you should definitely go for new ones. Hypertherm powermax 85 consumables stands can be a good choice for your industrial machines. It has its own benefits like it provides good quality, longevity, precise outcome, etc. From nozzles to any consumables, quality should be your first priority while buying new industrial equipment.


  1. Power and Consumption Requirement

Before buying industrial machinery it is crucial to inquire about its power and consumption requirements. For example, if the equipment needs only a domestic power connection, then it is a good feature. And, if it has a high-power requirement, you may have to arrange a commercial electricity connection for it from the governing agency of your area. This power specification demands a large amount of investment and can be time-consuming too. 

Additionally, you should not forget to check the consumption rate of the machinery that you are considering. This will help you to calculate the energy cost involved in your production. 


  1. Required Space

Before purchasing industrial equipment, you should determine the amount of space it will take for the installation and operation. Because absence of enough space can hamper your operation and outcome. This eventually will affect your business' overall production. 


  1. Warranty Period

As you are well aware that purchasing industrial equipment is a huge investment. Thus, you should never skip checking the machinery's warranty period. Also, check all the details properly to determine which specific parts come with a warranty and which parts don't. Also, you should evaluate warranties to know what amount you need to pay if any service issue arises in the future. 


Additionally, you should inquire at what intervals the machine's parts need a replacement because that will directly affect the machine's efficiency. Hypertherm powermax 65 parts serve as quality replacement parts by enhancing the efficiency of the machines. 

Bottom Line

If you consider all these things, you will end up getting the appropriate industrial equipment for your manufacturing business. Having the right machinery and consumables of good quality that fulfill your requirements can make a huge difference in your manufacturing company. It also directly affects the final products' outcome. For example, if you invest in plasma cutting machines and consumables, then Hypertherm powermax 85 consumables and Hypertherm powermax 65 parts work best for you.

Source:

Tuesday, September 14, 2021

How to Choose an Ideal Grinding Machine

 The Grinding machine helps in grinding various kinds of materials. Many manufacturing companies use grinding machines to grind their hard materials in bulk. This machine has a harsh wheel as its central component/part. Machines with quality parts like danobat parts can serve quality outcomes. There are different types of gritting machines for different purposes. But how to know which one is the ideal gritting machine for your company? We can help you with that. Here, we have all the details you need to know before investing in a gritting machine. Let's start with knowing the types of gritting machines.

Types of Grinding Machines

  • Belt Grinding- It conducts the process of edge breaking, removing stock, and finishing.
  • Bench gritting - Also called a pedestal grinder; it is a machine that is attached to a bench that one can raise to the appropriate working height. It is useful for sharpening cutting tools, rust removal, deburring, polishing, etc.
  • Surface Grinding- It works on the surface of the workpiece to make it extra smooth.
  • Jig gritting Machine- It is generally helpful for processes that need extreme accuracy and finishing. It is best for gritting complex shapes.
  • Cylindrical Grinding Machine- It uses the central axis of rotation to grind the workpieces.
  • Gear cutting Machine- It is a standard grinding machine that performs many other functions like hobbling, machining, forging, and others.

Specifications for Grinding Machine

The grinding machine manufacturers apply various specifications for manufacturing the gritting machine. Here are a few main specifications for such machines:

  • Grinding wheel size
  • Frequency and voltage-rating of machines
  • No-Load speed
  • Horizontal or vertical spindle
  • Input power required for operating the various grinding machines
  • Hand-operated or CNC controlled machine

Choosing Ideal Grinding Machine for Business


Grinding material is the first factor you should consider before finalizing any gritting machine. For instance, a gear cutting machine is best for gritting materials like wood, metals, and plastics; the belt grinding machines are the best for grinding the metals, etc. So, the key here is that if you can have a small-scale investment in a grinding machine that can fulfill your purpose, you don't need to go for a higher-valued one. Contradictory, if your materials need a large and advanced gritting machine, then you should not settle for the small one. As these will affect the quality of the final product. Thus, material type is a primary factor for choosing specific gritting machines.

The grinding of cylindrical metals may seem like a simple process, but it is not how it actually is. Material Gritting requires the right grinding machinery to save time and materials from getting wasted. Choosing the latest type of machinery is recommended for bigger plants as the updated grinders come with the advanced technology and parts.

The latest version of grinding machines with diamond dressing is high in demand. It serves great convenience as compared to older versions of gritting machinery. You can use coarse wheels for small-scale grinding projects. Also, you can increase your machine's shelf life by replacing the old machine parts with new danobat spare parts.

Factors to Consider While Choosing an Ideal Grinding Machine for Your Business


1. The Most Used Grinding Machines

Following are the most used grinding machines. The manufacturing and selling of these machines are high in demand:

  • Internal: Used by the inner diameters of cylindrical metal surfaces.
  • External: Used by the outer surfaces of cylindrical metal surfaces. The external grinding machine has two grinding wheels. These wheels grind the material together in the external diameters of cylindrical metal objects.

There are different machines available for gritting specific shapes of objects. Your choice of machines should depend on the volume of the material, type of materials, and the kind of work piece you want out of it.

2. The Volume of Grinding

Small-scale activities can use smaller abrasive wheel grinding machines. They don't need to invest in giant machines as the smaller gritting machines can easily manufacture their volume of materials. The large-scale project processes tons of metal per year, and it needs large-scale machines with a high investment for bulk material Gritting. This gritting machine saves a significant amount of time and effort with gritting on a large scale. The larger the wheels of such gritting machines, the larger the objects it can grit at significantly less time.

3. Technology and Manpower

Several kinds of activities used to require manual effort. Today, machines serve several automated features that require less manual effort; sometimes, it is only limited to push the machine's start switch. But with the innovation in the technological field, there have been several modern variations introduced in the field. You need to choose a machine with advanced parts like danobat parts to decrease workforce and wages, with the increase in the machine's efficiency and technicality.

4. Semi-Automation

When labor costs are too high or there is a lack of labor, the semi-automated machine is the best choice. The fully manual gritting process can create health hazards and increase the overall manufacturing budget due to high labor wages. Thus, it is beneficial to use semi-automation gritting machines in these situations. But, remember, you need to follow the safety standards. You should offer your laborers bulletproof glasses and proper training on how to use the machines.

I hope you gained more knowledge about gritting machines which will eventually help you choose your ideal one. But don't forget that you need to replace your old machine parts with the danobat spare parts. This will enhance the quality and longevity of your grinding machine.

Source: https://altpartsinc.wixsite.com/altpartsinc/single-post/how-to-choose-an-ideal-grinding-machine

Monday, September 6, 2021

Top 5 Tips to Select the Right Plasma Cutting Consumables

 Choosing the correct plasma cutting consumables is one of the significant steps in ensuring a perfect plasma cutting operation. If not chosen correctly, poorly fitted consumable parts can have a major impact on cutting performance. Damaged or poorly fitted consumables can result in blow-outs, melting, and oddly pitted areas around the nozzles. This is why consumables must be fitted correctly, or else nozzles and body won’t contract that can damage the consumables.


You can avoid these mishaps by selecting the right plasma cutting consumables like hypertherm powermax 45 consumables, hypertherm plasma cutter swirl ring, hypertherm powermax 65 parts, and more. Keep reading this blog post, where we have discussed the top five tips to select the right plasma cutting consumables.


  1. Choose the Right Consumables


The first and foremost tip is to select the right consumables for your machine. You might think, what kind of a tip is it? Isn’t this pretty obvious? Well, the answer is both yes and no. You would be surprised to know how many times people pick up the wrong consumables and install them. For instance, the requirement is of hypertherm powermax 45 consumables and you by mistake picked up hypertherm powermax 65 parts. It’s mainly because many consumables look similar. To avoid this, you can verify if the consumables part numbers match the numbers shown in the operator’s manual.


  1. Set Amperage as per Your Consumables


The amperage that you choose is based on the amperage of your nozzle. That’s the reason why you won’t find the amperage details in the charts or manual. For instance, if you’re using a 60-amp nozzle, then you should set the amp to 60 as well.


You should ensure that you don’t set the amperage lower than the nozzle requirement. Because if you do it, it will generate a low-density cost that can prevent plasma arc from penetrating the material. At the same time, you should not exceed the amperage value more than the capacity of consumables. If you fail to do it, then it will wear down the nozzle quickly.


Setting a higher amperage will offer you a faster cutting rate. In comparison, the lower amperage will offer a better quality of cut.


  1. Know When to Choose Shielded and Unshielded Consumables


You should choose unshielded consumables if your CNC machine does not have ohmic sensing. Similarly, you should go for shielded consumables if your CNC cutting table comes with an ohmic sensing circuit that determines the location of the surface with the use of electrical contact with the material and shield.


  1. Use the Proper Pierce and Cut Height


Maintaining height control is essential once the machine starts cutting. If the height of the torch gets increases even by 0.0005 inches, then you’ll see wider kerf, angularity, dross, warpage on thin materials. Similarly, if the torch is a little closer, then the materials are bound to collide. 


Along with the cut height, you also have to maintain the pierce height to ensure the longevity of consumables’ life. High piercing can prematurely damage the nozzle. Whereas, with the low pierce height, the splatter blown can damage the nozzle. The suitable height for piercing is half of two times the distance between work and torch.

 

  1.  Check Arc Voltage Measurement


Arc Voltage Measurement is an essential factor in choosing suitable plasma cutting consumables. It’s the unit of measurement between cutting material and electrode. It’s also directly proportional to the plasma arc. Higher the value of arc voltage measurement, the longer the arc. That’s the reason why you must be aware of it. You can check the measurement from the manual and set it.


The setting also includes the cut height as per the consumables. In case the consumables are old and torn, you have to maintain the distance manually.


 Conclusion


Choosing the right plasma cutting consumables is essential, and you can achieve this by following the top five tips mentioned here. Following these tips can ensure top-notch cuts along with long consumable life. Here, we have mentioned the top five tips to select the right plasma-cutting consumables.


Source:

Friday, August 27, 2021

Replacing vs Repairing: How to Deal with Damaged Equipment?

What to do when an essential machine part or any equipment has broken down? Whenever an essential piece of equipment has some issues with its functioning, it directly affects your manufacturing productivity. And, of course, your bottom line suffers too. Your team needs to search for a quick, budget-friendly, and effective solution in similar situations. Here, the most crucial question arises- if one should opt for replacing or repairing the equipment?


Often manufacturers choose to repair equipment rather than replacing it with a new one because of the budget factor. But, the costs of repairing frequent breakdowns, unmet productivity, defective output, etc., can sometimes be more than the cost of replacing the equipment. Mitsubishi replacement parts can prove to be the best choice in case you choose to replace them.


Leaving your decisions to guesswork can result in a costly and dangerous approach. So, you should have a list of factors that can help you direct which way your ship should sail. And we got you that list:

 

  1. Data-Driven Decisions


Your only concern should be getting your production back online as quickly as possible. The reactive decision you will make may work out temporarily but can cause trouble in the long run.

 

In addition to the apparent replacement cost of a new piece of equipment, there are other several factors too that you should take into consideration while deciding between getting the equipment repaired or replaced like:

  • Ongoing maintenance can cost over the remaining equipment's life 

  • Costs incurred by the equipment downtime

  • The impact any repair would do on productivity and quality of the equipment

  • Health, safety, and environmental costs that may come with equipment breakdown

  • Training and buying costs for a new piece of equipment

  • Disposal and installation costs


With these many factors to consider, it is clear that you should not make this decision without the proper data analysis.


  1. Analyze the Costs


You should always think long-term while analyzing the costs of repairing or replacing equipment or parts of any equipment. For a new piece of equipment, consider:

  • The cost of purchasing it

  • Its service life

  • Operating costs

  • Potential salvage value

  • Any revenue increase it may bring in the future.

  • Its remaining service life

  • Operating costs and market value

  • Future salvage rate for an old piece of equipment

 

By calculating these figures, you can determine an annual average cost for each option so that it will be  easy to compare. Mitsubishi replacement parts and Mitsubishi machine parts are the best options you can choose for the cost-friendly and efficient replacement of machine parts.

 

  1. Consider the Age of Equipment


Equipment does not age with grace like humans. The older your machinery gets the more extensive repairs it will demand. This translates to higher maintenance costs. Also, as you continue to repair, the machine may perform less and less as per your repair investment. After which, you might want to consider replacing an old malfunctioning piece of equipment with a technologically advanced new model. Probably the one that gives you better efficiency in the long run. 


  1. Consider Downtime


The impact of downtime on productivity while the asset is under repair is a significant factor to observe. If it takes numerous days to get repaired, and if this happens frequently, you know you have lost several hours of productivity. And it is undoubtedly not acceptable. Consider this factor while deciding if you want to get the equipment repaired or replaced.


 

  1. Consider the Cost of Repairs


While calculating the cost of repairs, you should also consider how often you will be paying those costs for repairs? Because you don't want to continue repairing the same equipment several times a year, right? For this, you can look for asset repair events that provide information on the number and frequency of breakdown events and the repairs' costs. 

 

  1. Consider Safety


Often the older equipment causes injury to workers in case of malfunctioning. Even if you opt for up-to-date maintenance, equipment or certain parts of equipment tend to function down as it ages. Also, inspect your machinery before you make any decision. This will help you to determine if your current equipment can continue to provide a safe environment to your workers or need a replacement. If it meets safety standards, it is only worth comparing to the costs of a replacement versus repair.



  1. Consider Efficiency


It is always smart to think of the long run. Questions like, 'How efficiently is your equipment working now?' 'Will a simple repair give the efficiency of the level you want?' 'Would a new piece of equipment with newer features that uses less fuel, and breaks down less frequently be a better choice for your efficiency?' are must-ask for calculating the efficiency that a repair or replacement can give you.

 

Replacements can be costly but efficient too, and that is what matters in the long run. Repairing costs less, but it doesn't make sense if you need frequent repairs, right? We hope your ship now knows which direction is meant for it to sail. Whichever way it is, Mitsubishi machine parts can provide you with the best services for both.


Source:

Wednesday, July 28, 2021

Top 7 Benefits of Plasma Cutting - Vehicle Maintenance and Repair

 


Plasma cutting is an advanced cutting technique. It cuts through the thin sheet metal with a focused and ionized jet of gas. It’s known for cutting most non-ferrous metals, especially sheet-pressed steel, under one inch of thickness.


Plasma cutting is the first choice for fast, clean, and cost-effective cutting today. Its effectiveness on both thick & thin sheets and electrically conductive materials makes plasma cutting distinctive from other cutting methods.


But even after such distinctive advantages, many fabricators are unaware of it. This unawareness leads to the metal fabrication of inferior quality. In this article, we will share the top benefits of plasma cutting that you must know.



Top 7 Benefits of Plasma Cutting That You Should Know [400]


 High Speed

When it comes to cutting speed, plasma cutters top the charts. It can achieve a high temperature of 40,000 degrees Fahrenheit. This high temperature enables plasma cutters to cut through metal at lightning speed. A plasma cutter can cut a 1.25-inch thick sheet of metal in almost 1.5 seconds. To give you a perspective on how fast that is, an oxyfuel cutter takes around 20 seconds to complete the same task. This high speed of plasma cutting enables manufacturers to get more output in a short period.


Versatility

Traditional cutting methods are not that effective with Aluminium and Stainless Steel. Well, this is not the case with Plasma cutting because of its great versatility. Plasma cutting can cut diverse metals like iron, aluminum, brass, steel, copper, etc. 


It can also cut different types of metals stacked over one another. And that too at an impressive cutting speed. You can also achieve this versatility in your cutting operations. For this, you have to invest in Hypertherm plasma cutter parts.


Ease of Use

Plasma cutters are portables as you can take them everywhere with ease. Some brands like Hypertherm are so portable that only a single person can handle Hypertherm plasma cutter parts with ease. You may also consider carrying Hypertherm spare parts for any emergency.


Piercing Speed

Like cutting speed, Plasma Cutting outshines oxyfuel cutting in piercing speed as well. Many times, cutting applications need inside piercing. To pierce 15 mm metal through the Oxyfuel method, it needs a temperature of 1000 degrees Celsius. It takes approximately 30 seconds to achieve that temperature. In contrast, Plasma Cutting doesn’t need this step. So, it can do the same task within two seconds.


Cost-Effectiveness

Plasma cutting helps manufacturers to cut fast, and that too with little waste. Also, it causes little or no loss due to on-job injuries. These factors, and other cost-effective practices, lower the price for the end-user.


Safety

Plasma cutting is a safer option as it relies on inert gases. In comparison, Oxygen-based cutting like Oxy-fuel comes with greater risks. It comes with the risk of accidental ignition or explosion while they are in storage or use. 


Future-Proof

Many traditional cutting methods are on the verge of becoming obsolete. It’s because they have stopped growing and adapting to the latest technology trends. In comparison, plasma cutting is undergoing a process of development and growth. 


It has adopted the current trends in CAD/CAM design technology, CNC machining, and robotics. Such modern features enable metal manufacturers to stay relevant in these changing times.


Conclusion

Plasma cutting has gained popularity among metal fabricators. It’s mainly due to its unmatched precision and speed. It’s an easy-to-use cutting method that is versatile, cost-effective, and safe. You can leverage this future proof cutting method to produce clean, precise, and sealed cuts. To achieve the best results from this cutting method, you can invest in Hypertherm plasma cutter parts and Hypertherm spare parts.


Original Blog:

Steps For Achieving The Perfect Press Brake Bend - Vehicle Maintenance and Repair

 Achieving a perfect press brake bend is a complicated task. And to accomplish it, you’ll require to follow several critical steps in a sequence. It means that you cannot skip any of these steps in the process. Each step is like a link in a chain. Adding these links step-by-step will form the whole chain. This is the reason why the success of every step depends on the success of its previous step.


To ensure the proper implementation of these critical steps, you require an advanced and robust press brake machine. For this, you can simply search “amada press brake for sale” on any search engine and get the best press brake machine for bending metals. Now, without any further ado, let’s have a look at the eight steps for achieving a perfect press brake bend.


Steps to Achieve the Best Press Brake Bend


Choose Metal Type

The first step is to choose the metal type. Different metal types have different properties which affect the way they react to stress. Metals also stretch when bent at different rates of force. The degree of this stretch depends on the material of metals. That’s why it is essential to know about the metal type material you’re going to use for the press brake bend. Apart from the metal material, the other factor determining the bend is the thickness of the metal, the shape of the die, etc.


Create Drawing

The next step is to create the drawing of your desired bend. You can do this by determining the shape of the bend that you want to produce. You can also use the previous reference drawings to ensure the preciseness and accuracy of the bend.


Choose the Bending Method

Choosing the most suitable bending method is critical in achieving a perfect bend. Most of the bending methods look identical, but they do have minor differences which sets them apart. Predominantly, there three types of bending methods:

  • Coining

  • Air Bending

  • Bottom Bending

The selection of the bending method will largely depend on what you’re going to make. Apart from these you also have to consider the following factors:

  • Tools available

  • Size of the metal

  • Type of metal


Determine Tonnage

The next step is to calculate the tonnage which is required to bend the material. The tonnage will also depend upon the material of the bending method. Tonnage charts are readily available on the equipment. If you don’t have one, then you can use the Press Brake tonnage calculator.


Assess Tooling Position

After determining the tonnage, you’ve to assess the tooling position of the material. If you need more tonnage than the concentrated load limit of the machine, then you’ve to go for the off-center. You can check if the press machine allows the off-center. If you don’t have one, you can simply search “  Amada press brake for sale” on any search engine. And get a press brake that comes with an off-center loading.



Install the Right Tooling

Once you make all the calculations, it’s time to set up the machine. This is the most time-consuming process. So, you must ensure that all your calculations are accurate. The manual setting up of parts will differ from machine to machine. If you’re missing a part of the machine, you can simply order Amada replacement parts to continue setting up the machine. If you’re still unsure how to set up the machine, you can consult the manual or ask any experienced press brake operator.


Enter Calculations

Once you set up the machine, you’ve to enter the calculations into your press brake machine. This step is highly dependent on the type of machine that you’re using. If you’re using an older machine, then it might require manual programming. However, the modern press brake machine comes with many things pre-configured. 


Examine Your Bend

The last step is to examine your bend. You can do this with a test run to ensure that everything is perfect before it goes to mass production. If you find any kind of error or defect, then you should go back to the previous steps to find out the source of the error.


It may happen that the initial parts of the mass production will have some imperfections, and that’s normal. However, you must conduct post-run tests to ensure that all the parts are meeting your standards.


Conclusion

Achieving a perfect bend is a step-by-step process where you must get the previous step right before moving to the next one. While implementing these steps, you might encounter some defective parts of the machine that can slow down the process. You can overcome this challenge by replacing those parts with amada replacement parts.


I hope this guide helped you to understand all the steps involved in the process of getting a press brake bend. If you have any questions or queries, you can post them in the comment section


Original Blog: